Solar Edge – The Tesla Powerwall Battery Ready System using a SolarEdge Hybrid Inverter

The SolarEdge Tesla Powerwall Home Battery Ready Inverter

Introducing the SolarEdge Hybrid Single Phase hybrid solar inverter. With already thousands of SolarEdge and Tesla Powerwall systems setup and operating at maximum efficiency, if you are wanting to get a Tesla Powerwall Battery Ready Solar System or a full Tesla Powerwall and Solar System installed, get an instant quote here!

StorEdgeÔäó: Optimizing Self-Consumption

SolarEdge’s StorEdgeÔäó DC coupled storage solution allows home owners to maximize self-consumption and to enable energy independence. Unused PV power is stored in a battery and used when needed to maximize self consumption. The solution is based on a single inverter for both PV and storage. Existing SolarEdge systems can be upgraded to the StorEdgeÔäó solution.

Basic Self-Consumption + Backup

[creativ_columns structure=”50|50″][creativ_col position=”a”]

SolarEdge Inverter


The SolarEdge inverter manages battery and system energy, in addition to its traditional functionality as a DC-optimized PV inverter

[/creativ_col][creativ_col position=”b”]

SolarEdge Meter


For battery integration and for production / consumption readings for Feed-in Limitation


[creativ_columns structure=”50|50″][creativ_col position=”a”]

StorEdge (tm) Interface

StorEdge TM

Simple installation and connectivity

Existing systems can be upgraded

Designed to eliminate DC voltage and current during installation, maintenance, or firefighting

[/creativ_col][creativ_col position=”b”]

Tesla Powerwall Home Battery

Tesla Powerwall
Home Battery

7kWh, ideal for maximizing self-consumption

High-voltage, high-efficiency DC coupled battery



1. More-Energy

DC coupled solution allows high system efficiency

PV power is stored directly in the battery

No additional conversions from AC to DC and back to AC

Module-level power optimization for more power harvesting

2. Simple-Design-and-Installation

A single inverter for both PV and on-grid storage

Outdoor installation allows flexibility in battery location

No special wires are required  utilize the same PV cables

No high voltage & current during installation and maintenance


PV array and battery voltage designed to reduce to safe voltage upon AC shut down

Compliance with VDE 2100-712

4. Full-Visibility

Monitor the battery status, PV production, and self-consumption data

Smarter energy consumption to reduce electricity bill

5. Easy-Maintenance

Remote access to inverter/battery software

Easy access to the inverter during maintenance (outdoor installation)

SolarEdge Dashboard


These costs are based on the SA Power network in Adelaide but prices may vary depending on your circumstances. This comparison assumes a general energy usage of 4000kWh/year for a residential customer on Energy Locals Time of Use Tariff – (TOU – Peak, Off-Peak & Solar Sponge).

The reference price is set by the Australian Energy Regulator (AER) for a financial year in relation to electricity supply to residential customers in the distribution region and is based on an assumed annual usage amount. Any difference between the reference price and the unconditional price of a plan is expressed as a percentage more or less than the reference price. The terms of any conditional discounts are shown, along with any further difference between the reference price and the discount applied if a condition is met, expressed as a percentage more or less than the reference price.